SOLDFS2000 Tactical Loaded, Launcher, Eotec, Aimpoint &

[brickwurx mfg.]

After countless hours of prototype work, and investing in a possible production run of our launcher and hand grip assemblies,
we have decided to move on from the FS2000 platform. While we truly love the FS2000 rifle, we were finally convinced the total
cost of production could not out-way the price of an initial investment. Of our three rifles used for prototyping, we are selling an entire
single finished complete package, to a forum member that may have interest in our hard work.


Included is our demo rifle, (500 rounds fired through the barrel, max). We used the other two with countless rounds for testing,
this one was used for show. Below are the list of mods included, all non permanent to the rifle, ( meaning this rifle can be switched
back to full factory if wanted).

1. FS2000 with less than 500 rounds through the barrel.
2. Extended magazine release lever – Original, and extra parts
included in parts bag.
3. Trimmed magazine gasket - Not a full trim or removal, only 1/16” removed, for use with select polymer mags. Not for true empty
mag drop free, but a snap to switch mags (best of both worlds).
4. Magpul Gen 1 MBUS front and rear backup sights – perfect for
use with Eotec. Front sight MBUS has been modded to fit rifle perfectly. Original front sight and sight adjustment tool included in parts
bag.
5. Eotec XPS2-2 Holo sight. Will also include original box,
instructions, and extra parts.
6. Custom Ambi sling mounts- this item is a full custom rig,
not found elsewhere. It was designed similar the the Magpul AR sling mount. Can be flipped for CQB. We are including both our
original “fast draw” mount, and our newer design with notched edges for straight hang. Both models lower the center of gravity for the rifle
to hang more naturally to the shooter with extra fast draw, something no other sling mount can do. These sling mounts are non permanent
mods, so the rifle can be easily converted back to factory! One screw
removal with one screw spacer. Originals plus extras are
included
in parts bag.
7. Aim-point 3x magnifier and La-rue spring loaded push to
side mount.
8. Custom Case logic field repair and cleaning butt stock kit.
( parts are pictured in photo, and includes cable & brush cleaning
parts.
9. Custom modified forward grip ( removable), modeled after the Magpul AFG grip. This custom grip includes a dual 123 battery pack for
combo light and laser. This forward grip has a side button for adjustable laser light ( up down, side to side, adjustments in grip), and a
forward push light switch for trigger finger. More pictures and specs can be found on this forum in the FS2000 Accessories and Mods
forum pages.
10. Custom 37mm Grenade / flair forward grip launcher ( removable). Pictures and specs can be found on this forum in the FS2000
Accessories and Mods forum pages, Look under FS2000 specific prototype Launcher. This is the ONLY functional launcher not made by FNH
for the FS2000, and probably the ONLY launcher available for sale in the USA! While we have been able to use plastic casings with this
launcher om occation, the launcher was made specifically for aluminum cased shells.
This launcher has a double wrapped steel tube for safety.
We only recommend specific loads such as flair or gas be used, as the launcher is a very short design. Most shells over 6 inches would
not be safe to fire, nor will all shell types fit. The
Launcher will come complete with laser and light included, ( uses 123 batteries). This launcher has a easy pull spring pin and
catch with easy reach from
either hand, please see other forum section for details.
This launcher has a push to fire trigger, in line with the firing trigger of the rifle, meaning your finger never leaves the trigger zone.
Launcher has no safety lever or button, meaning charge to fire, fire when ready.
We recommend wearing gloves when using this device as the short
barrel configuration could leave sensitive hands with powder residue (we have never had a powder burn). Most parts inside the launcher
assemble are AR parts, so replacement is easy.
11. Custom rifle case, fits three mags ( only factory mag with
ranger pull included), four 37mm shells ( cannot ship loaded shells, but will happily include an assortment of empty aluminum cases on
request)
12. Single point sling- adjustable, fits into case
13. Parts kit-
x2 backup trigger assemblies
x1 original mag release
x2 mag release springs
x1 inspection cover
x2 magazine catch boxes
x3 assorted case screws
x1 original front sight
x1 original front sight adjustment tool
x1 secondary custom CQB sling mount

Original rifle box can be shipped upon request.

We will only ship to a FFL shop that we can verify, and only within the continental US. Please ensure ALL the items included in our sale are
legal in your state. We are not responsible for a buyer that neglects to check state law. Also, this is a firearm, please be safe. As with
any prototype accessory, always inspect your purchase. We recommend firing 37mm blank loads first to get the feel of the trigger
assembly. Remember prototype parts have been tested often, and may show slight signs of wear.
While we do our do our best to maintain a good appearance,
function is our priority when working with new products.

We will accept Check or Money Order and ship after clearing.
Or possibly Paypal (gift only).
Thank you very much for view our listing, please PM us with any questions.

[brickwurx mfg.]

Sold Pending Funds.

[SONYtec]