Steel Shield Weapon Shield CLP

[tqtran]

I finally got a chance to try out this CLP.
Its very easy to use like most CLPs.
It was quick and easy to clean my FiveseveN with.
The big thing I liked about it compared to other CLPs is the oiler pen.
It makes those hard to reach placed a snap!
No more letting globs of CLP run down the rails of your slide.
You can apply just only what you need and so you don't have to cleanup your gun after you clean your gun



I plan on ordereding more soon, this stuff is top notch!

[djv38]

I love those precision applicators

I hope my sample comes in today. Can't wait to give it a try, and I'll likely be using this in the future (when I get more firearms and do more shooting. I have my FNP and a shotgun at the moment and haven't been able to do much shooting (ok, non) since mid December and won't be able to do much until spring due to school)

[djv38]

Got mine today. My FNP is now cleaned and lubed with it. I even got the hard to reach places I new I should oil but was afraid to because I'd probably dump too much in.

Great product

[M1P90]

Just received my 4 oz bottle and the oiler pen with the needle applicator.
All I can say is ... This stuff is DA-BOMB!!!!

I compaired it to Zero-Friction and found that Weaponshield is MUCH better.

Weaponshield is thicker so it doesn't run as much.
Weaponshield has better viscosity so it protects and lubes longer.
(It seams to be much more slippery)
The Oiler pen is thin so it can reach into tighter areas

This is all I'll use from now on!! Great Job!!!!!

[spartanranger]

I got my sample in the mail and it is a wonderful product. My dumb butt has been using RemOil and this stuff blew it out of the water. I hate military CLP because of the horrible smell but I couldn't even smell this stuff. It was nice and thick and could lubricate a larger surface than an equal amount of RemOil. The RemOil disappears on you after a little while but this stuff sticks around.

I used it on my SCAR and my Glocks and I won't be going back to anything else. Gonna place an order soon for some big bottles and some grease. Very happy with this product!

[gcfennell]

Hey Guys!

I want to take the time to thank you all for your support and great comments about Weapon Shield and how you’ve all found it to be in performance on your weapons and the like.

Make no mistake; times are tough financially, not only for us but for everyone so we decided to try something that just may benefit us all in creating sales and saving you all some cash.

Here’s the deal:
Until the end of August (31st), if you call in an order of any size Weapon Shield or Weapon Shield Grease, (800-390-1535) and mention the “August Sale”, you’ll receive 20% off of your order. We can’t really do this on the web-commerce site, as it’s all pre-programmed to the retail pricing and such. But calling our toll free and mentioning the sale to Gary or Mark will get you the discount. Also, if you don’t mind the US Postal system over UPS, we can save you a bunch in shipping as well. And that’s pretty significant, seeing that UPS charges almost as much as the 4 ounce Weapon Shield costs, just to get it to you.

The SECOND part of the deal is this:
For those of you who have never tried our other products like V-Twin Shield, Engine Shield, Truck Shield, Marine Shield, or Transmission Shield, we’ll extend to you a 25% off discount on any of those. For those of you who already buy or use them, now’s the time to stock up or get a deal on them. If you’re not familiar with them you can check them out here:
http://www.youtube.com/user/Weaponshield#p/a

Or to read about them, here:
http://www.steelshieldtech.com/mainpage/

We’re not looking to take business away from our distributors and reps; that’s why the sale is limited to the end of August. We’re looking to enhancing sales as well as saving you, our customers some money in the interim.

You guys have always been our “wings” and word-spreaders over the web, so please feel free to repost this on all the various and different forums out there that you see fit. Thanks again for everything guys…you rock!

Best regards, as always,
George

PS: Please come Join us on Facebook @ The Official Weapon Shield Fan Club ( http://www.facebook.com/group.php?gid=142235176117 ) or you can hit me up at my personal page at http://www.facebook.com/george.fennell

[SgtStrykerUSMC43]

Hi George. Just a quick question [if you don't mind] - Does Weapon Shield remove jacket fouling using the 'tightly wrapped patch, over a synthetic bore brush" method?

I'm one who has stuck with stuff that has worked for me over the years, so please don't take offense to my inquiry.

[gcfennell]

Hi George. Just a quick question [if you don't mind] - Does Weapon Shield remove jacket fouling using the 'tightly wrapped patch, over a synthetic bore brush" method?

I'm one who has stuck with stuff that has worked for me over the years, so please don't take offense to my inquiry.

Hey Sarge!
None taken, whatsoever
I'm afraid it takes a bit more than that. WS can get it out but it takes about 24 hours of soaking the bore with it. It needs time to chemically "get under and lift" out the guilded metals. Most folks will prefer to go with a more aggressive copper cleaner/remover to get it out quickly. THEN follow up with WS and THAT will keep the copper from building up on the lands and in the chamber...guaranteed!
Best regards,
George

[s4mur41h4x0r]

Thanks for the response to the fouling question! I was going to ask you that question as well

Glad to see you back on here

[gcfennell]

Thanks for the response to the fouling question! I was going to ask you that question as well

Glad to see you back on here

My pleasure.

G