PS90 Hammer Pack Disassembly
This is a discussion on PS90 Hammer Pack Disassembly within the FN PS90 Accessories & Mods forums, part of the FN PS90 Forum category; I noticed that on the hammer pack, that four of the five removable pins measure .157 inches but the fifth pin (actually number 3 located ...
+ Reply to Thread
Results 1 to 10 of 76
7ThanksThread: PS90 Hammer Pack Disassembly
LinkBack URL
About LinkBacks-
01-05-2012, 07:45 PM #1Super Moderator FORGET THE DOG BEWARE OF THE OWNER
- Join Date
- Apr 2007
- Location
- Florida
- Posts
- 3,236
- Thanked
- 273 times
PS90 Hammer Pack Disassembly
I noticed that on the hammer pack, that four of the five removable pins measure .157 inches but the fifth pin (actually number 3 located at the bottom center of the pack) that holds the front and rear sears is larger and measures at .1585 inches. While the four pins are easily removed, the fifth (3rd) pin is rather obstinate and refuses to come out. I suspect that with this oversized pin, it was pressed in and has to be pressed out.
Anyone have any success with this pin removal and what did you use to remove it as the recommended punch does not work.
I suspect that this is one of the two mods that FN did to the pack to prevent modifications.
Last edited by HK SD9 Tactical; 01-06-2012 at 07:05 AM.
A pure democracy operates by direct majority vote of the people. When an issue is to be decided, the entire population votes on it; the majority wins and rules. A republic differs in that the general population elects representatives who then pass laws to govern the nation.
-
01-05-2012, 07:55 PM #2
Did you check the armorers manual for suggestions?
-
01-05-2012, 07:59 PM #3Super Moderator FORGET THE DOG BEWARE OF THE OWNER
- Join Date
- Apr 2007
- Location
- Florida
- Posts
- 3,236
- Thanked
- 273 times
Roger Dodger. It says use a punch but all the pins are the same size in the manual. You don't really need a punch because they just press in and out but the pin ( 551(3) ) is oversized and I suspect it was pressed in so that the pack can not be disassembled without some type of press....
Originally Posted by jhs27275
A pure democracy operates by direct majority vote of the people. When an issue is to be decided, the entire population votes on it; the majority wins and rules. A republic differs in that the general population elects representatives who then pass laws to govern the nation.
-
01-05-2012, 08:08 PM #4
Maybe Sarge can tell us, but I think you're right about the reason.
-
01-05-2012, 09:46 PM #5Senior Member ALL HAIL CAESAR
- Join Date
- Jan 2009
- Location
- Wouldn't you like to know ...LOL
- Posts
- 17,476
- Thanked
- 477 times
Don't try to drive it out. There's a blind pin it it that keeps in from being removed.
07/02 SOT Manufacturer, Suppressors, NFA Firearms, and everything else COOL!
-
01-05-2012, 09:51 PM #6Super Moderator FORGET THE DOG BEWARE OF THE OWNER
- Join Date
- Apr 2007
- Location
- Florida
- Posts
- 3,236
- Thanked
- 273 times
Damn, that sux! Originally Posted by SgtStrykerUSMC43
Good thing that I don't need to disassemble it all the way to do what I need to do. But the Engineer in me just says "I got to, it's what I live for".
A pure democracy operates by direct majority vote of the people. When an issue is to be decided, the entire population votes on it; the majority wins and rules. A republic differs in that the general population elects representatives who then pass laws to govern the nation.
-
01-05-2012, 09:59 PM #7Super Moderator FORGET THE DOG BEWARE OF THE OWNER
- Join Date
- Apr 2007
- Location
- Florida
- Posts
- 3,236
- Thanked
- 273 times
I see the blind pin now. Sneaky little bastards.....
Damn, now I can't replace the sear spring to ease the trigger pull until I figure out how to get the blind pin out.
A pure democracy operates by direct majority vote of the people. When an issue is to be decided, the entire population votes on it; the majority wins and rules. A republic differs in that the general population elects representatives who then pass laws to govern the nation.
-
01-05-2012, 10:01 PM #8Senior Member FORCE RECON WANTS HIM
- Join Date
- Jul 2008
- Location
- USA
- Posts
- 12,542
- Thanked
- 181 times
Drill.
BTW, what gen, 2 or 3???11:00 P.M. EST Nov 4th, 2008, My nightmare came true...
12:00 P.M. EST Jan 20th, 2009, screwing began...
10:00 P.M. EST SUNDAY Mar 21st 2010, healthcare SHOVED down our throats!
Tuesday Nov 6th, 2012, We can CHANGE the president.
-
01-05-2012, 10:05 PM #9The drill is Gen 1. Originally Posted by SONYtec
-
01-05-2012, 10:06 PM #10Senior Member ALL HAIL CAESAR
- Join Date
- Jan 2009
- Location
- Wouldn't you like to know ...LOL
- Posts
- 17,476
- Thanked
- 477 times
I need detailed pictures of what it looks like after the bit walks all over the place.
07/02 SOT Manufacturer, Suppressors, NFA Firearms, and everything else COOL!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Similar Threads
-
WTB: Gen 1 / Gen 2 PS90 Trigger/Hammer Pack(s)
By Para in forum Want to BuyReplies: 24Last Post: 03-23-2012, 10:09 PM -
PS90 Hammer/Trigger Pack for sale SOLD!!!
By s4mur41h4x0r in forum FN Guns and FN items For SaleReplies: 5Last Post: 03-26-2010, 11:22 PM -
PS90 New vs. Old Hammer Pack (Grey/Black) Question
By jpainter187 in forum FN PS90Replies: 33Last Post: 11-29-2009, 08:37 PM -
Hammer Pack
By scotty0540 in forum FN PS90Replies: 15Last Post: 11-29-2009, 07:30 PM